|
12V/24V/36V/48V Lead Acid Lifepo4 Lithium Battery Capacity Indicator LED Digital Voltmeter Tester Car Motorcycle Voltage Meter
Features:
Battery capacity and voltage meter.
LCD backlit screen.
Long service life button with comfortable hand feeling.
Equipped with a PVC film, the surface is waterproof.
Built with buckle, free of screw installation.
Universal battery capacity meter, need to set up by yourself.
Specification:
Color: White, Green, Blue
Material: ABS
Size: 61.3 * 33.3 * 13.5 mm
Cable Length: 30cm
Voltage Range: DC 6-63V (do not exceed the voltage)
Circuit Load Current: <5mA
Suitable For: 2S-15S lithium battery; 12V, 24V, 36V, 48V lead acid battery; 3S-16S lithium iron phosphate battery
Setting Procedure:
1. Disconnect the module power supply, press and hold the Set Key until powering the module. Display shows the current power setting parameters;
2. Short press the Set Key to select P / L / F (P = 12V lead acid, L = 3.7V lithium battery, F = 3.2V lithium iron phosphate battery);
3. Short press the Function Key to set the number of the battery string(Set Key increases and Function Key decreases);
4. Press the Function Key for a long time to enter the advanced setting interface, use Set Key to select S1-S5, press Function Key to select or cancel the current mode(In advanced mode, the small cell in the battery symbol corresponds to S1-S5. For example, S3 corresponds to the third small cell, display means to be selected and no display means to be cancelled);
5. Reenergize the power after setting. The module automatically saves setting data.
E.g. 10 lithium battery power, turn on power percentage and voltage automatic rotation display (S1 mode)
Operation: Disconnect display module power, press and hold the Set Key, power the module, press the Set Key for a short time to select L, press the Function Key to select 10, press the Function Key for a long time to select S1 and repower then.
Setting Instructions:
S1: %/V Rotate display in 2s
Power percentage and voltage are displayed in turn recurrently and automatically;
S2: Inactivity sleep in 10s
Automatically sleep after battery capacity display for 10s, save power, press the Function Key to wake up power display for 10 seconds;
S3: Turn on backlight
Power display turns on or off power backlight;
S4: Show logo(Applicable to small battery icon)
Logo icon is located in the under face of battery symbol on the left side of LCD, turn on and show the logo;
S5: Discharge mode selection
Power displays two kinds of battery discharge curve, different environments convert to select appropriate battery discharge modes
|
